Requirements for your System

If you need to store the modem for a prolonged period, store it in the original antistatic bag and packaging. Observe environmental specifications as stated on page 76.

REQUIREMENTS FOR YOUR SYSTEM

You need the following hardware and software to complete the installation and configuration of the Megabit Modem 410F or 420F:

•PC with an Ethernet Network Interface Card (NIC)

•TCP/IP network protocol stack (see the documentation for your operating system)

•Web browser installed such as Netscape® or Internet Explorer® Version 4.0 or higher

•Ethernet hub (optional)

REQUIREMENTS FOR THE INSTALLATION SITE

You must select the locations to install the Megabit Modem 410F and 420F. You can install modems either:

•placed on a flat surface (shown on page 7)

•mounted on a wall (shown on page 8)

Your facility must have the following minimum site requirements to install each modem:

•power outlet

•RJ-11 wall jack with DMT ADSL service (you provide)

6

Megabit Modem 410F and 420F User Manual