Configuring ADSL Service

CONFIGURING ADSL SERVICE

You configure the ADSL transceiver service for both the Megabit Modem 410F and 420F from the Megabit Modem 410F (ATU-C) only using the CO End ADSL (DMT) Configuration page. From the Megabit Modem 420F (ATU-R), you view the ADSL configuration parameters from the read-only Remote End ADSL (DMT) Configuration page.

You must reset the ADSL link to effect ADSL configuration changes (see “Resetting the ADSL Link” on page 54).

Enter or view the ADSL configuration parameters. Configure items Ž through ‘ for both downstream and upstream. Downstream transmission is from the 410F to the 420F; upstream is from the 420F to the 410F.

1Click ADSL on the Main Menu, then click ADSL Configuration on the ADSL Menu to access the ADSL (DMT) Configuration page.

‹

Œ

•

Ž

•

•

52

Megabit Modem 410F and 420F User Manual