INSTALLING THE MEGABIT MODEM 3

410F AND 420F

The Megabit Modem 410F and 420F are easy to install by:

•attaching adhesive-backed feet

•setting the MDI/MDI-X switch

•connecting a cable from the modem to a PC or an Ethernet hub for LAN service

•connecting a phone cord from the modem to a wall phone jack for DMT ADSL Internet or other types of WAN services

•connecting a power cable to a local power outlet

•powering up and checking LEDs

Perform the installation described on the following pages (see “Requirements for the Installation Site” on page 6 to determine where to place modems). Use the parts listed below in the installation procedures.

Part

Function

 

 

Rubber feet (four)

Attaches to the base of the modem.

Black cable

Connects the modem 10/100BASE-T connector to the LAN through a hub

 

or to a PC NIC.

Grey cord

Connects the modem ADSL connector to the RJ-11 wall jack with DMT

 

ADSL service for access to the Internet or other types of WAN applications.

Power cable

Connects the modem POWER connector to the local power source. Power

 

supply optionally has a power cord. (See “Power Cable Options” on page 9

 

for selection options.)

Grey cable and

Connects the RS-232 management port to an ASCII terminal or a PC

adapter

running terminal emulation software. The adapter assembly connects to a

 

DB-9 connector on the PC. One RJ-45 connector installs in the adapter and

 

the other connector into the console port on the modem.

Megabit Modem 410F and 420F User Manual

11