CONFIGURING 5
SYSTEM SETTINGS
Before configuring the connection between the Megabit Modem 410F and 420F, set up the system parameters for each modem. The following sections show the Web pages you use to configure system parameters. Set the:
•TFTP server IP address and network mask for performing software upgrades on page 42, when required
•SNMP parameters on page 43
•system time and date on page 45
•system admin IP address on page 46
Unless specified otherwise, configuration parameters shown in this section are for example only.
After you set up system parameters, go to Chapter 6, “Configuring the Ports” on page 47 to configure the
Megabit Modem 410F and 420F User Manual | 41 |