ADC 410F, 420F Saving the Configuration to NVRAM

Chapter 4: Setting Up for Configuration

Saving the Configuration to NVRAM

After clicking Submit to write configuration parameters to RAM, update your configuration by writing the parameters to NVRAM. See page 36 for a list of changes you must save to NVRAM and reset the modem to effect.

1Click System on the Main Menu to access the System Menu.

2Click Update Configuration on the System Menu.

3Do one of the following:

•Click Proceed to save to NVRAM.

•Click Cancel. The configuration parameters are not written to NVRAM.

4Reset the modem to effect the configuration using the procedure on page 38.

Megabit Modem 410F and 420F User Manual 37