Appendix A: Specifications and Data

HARDWARE

The following provides additional information about Megabit Modem 410F and 420F such as the installation kit and modem connectors pinouts.

Installation Kit

The following items are included in the installation kit and are used to install each Megabit Modem 410F and 420F as shown in Chapter 3 on page 11.

Part

Description

Function

 

 

 

Rubber feet

Four black rubber feet

Attach to the base of the modem.

Grey cable

Silver-satin phone cord with 4-pin modular

Connects the modem ADSL connector to the

 

plugs (straight-through)

wall phone jack for access to the Internet.

Black cable

CAT 5, cable with 8-pin modular plugs

Connects the modem 10/100BASE-T connector

 

(straight-through)

to the LAN through a hub or to a PC NIC.

Power cable

Power supply with optional power cord (this

Connects the modem POWER connector to the

 

item is ordered dependent on the type of

local power source.

 

power supply and cord required for your

 

 

location)

 

Screws

Two 6x1/ -inch sheet metal screws

Installs into a wall for wall-mounting modems.

 

2

 

Grey cable

Flat cable with RJ-45 connectors and a DB-9

Connects the RS-232 management port to an

and adapter

to RJ-45 adapter.

ASCII terminal or a PC running terminal

 

 

emulation software. Adapter assembly connects

 

 

to a DB-9 connector on the PC. Then, one RJ-45

 

 

connector installs in the adapter and the other

 

 

connector into the console port on the modem.

 

 

 

Megabit Modem 410F and 420F User Manual

79