Configuring ADSL Service

4Configure the ADSL downstream and upstream parameters.

ŽEnter the Max Data Rate (kbps). The values entered should be in 32 kbps increments. If a non-32 kbps value is entered, the value is automatically rounded up to the nearest 32 kbps value. This is the maximum data rate attainable by the modems, and the data rate at which the modems sync will be equal to or less than this value as per the Startup Option parameter.

The downstream Max Data Rate (kbps) range is 64 kbps to 7552 kbps, in 32 kbps increments. The default is 7552.

The upstream Max Data Rate (kbps) range is 64 kbps to 928 kbps, in 32 kbps increments. The default is 928.

•Enter the Min Data Rate (kbps). This is the minimum data rate available for the modems, and the data rate at which the modems sync will be equal to or greater than this value as per the Startup Option parameter.

The downstream Min Data Rate (kbps) range is 64 kbps to 7552 kbps, in 32 kbps increments. The default is 64.

The upstream Min Data Rate (kbps) range is 64 kbps to 928 kbps, in 32 kbps increments. The default is 64.

•Select the Interleave Option (msec). For downstream and upstream, the options are 02, 04, 08, and 16 msec. The default is 04.

Higher interleave values provide more noise immunity, but increase the delay through the system.

5Click Submit when you complete all the ADSL configuration settings.

6After you make changes to the ADSL configuration, effect the configuration completing the procedures for “Resetting the ADSL Link” on this page.

Resetting the ADSL Link

Selecting ADSL Menu, Reset Link brings down the ADSL link between the Megabit Modem 410F and 420F.

54

Megabit Modem 410F and 420F User Manual