Using the RS-232 management Port for Set Up

USING THE RS-232MANAGEMENT PORT FOR SET UP

You can configure some parameter for the Megabit Modem 410F and 420F modems through the RS-232 port that is connected to a PC. You can use the Megabit Modem Setup Menu to do the following:

•manually change the LAN and WAN IP address and network mask

•enable Dynamic Host Configuration Protocol (DHCP)

•configure modem parameters (these are a subset of the parameters that can be configured using the Megabit Modem 410F and 420F Web pages)

Pairgain Megabit Modem 410F Setup Menu

========================================================

BSP version:

2.2

SW version:

2.8

========================================================

(1)Enter LAN IP

address:

192.168.0.1

(2)Enter LAN IP

network mask:

255.255.255.0

(3)Toggle Bridging:

Enabled

(4)Toggle Routing:

Disabled

(5)Toggle LAN DHCP:

Disabled

(6)Toggle Spanning Tree:

Enabled

(7)Enter WAN IP

address:

 

(8)Enter WAN IP

network mask:

 

(9)Toggle LAN RIP:

Enabled

(10)Toggle WAN RIP:

Enabled

(11)Enter default gateway IP address:

0.0.0.0

(12)Enter IP Admin address:

0.0.0.0

(13)Set Factory

Defaults

 

(14)Reset modem

 

 

>

 

 

24

Megabit Modem 410F and 420F User Manual