Hardware

HARDWARE

The following provides additional information about Megabit Modem 400F, 500L, 600F, and 700F such as the installation kit and modem connectors pinouts.

Installation Kit

The following items are included in the installation kit and are used to install the Megabit Modem 400F, 500L, 600F, and 700F as shown in Chapter 3 on page 18.

Part

Description

Function

Rubber feet

Four black rubber feet

Grey cable

Silver-satin phone cord with 4-pin modular

 

plugs (straight-through)

Black cable

CAT 5, cable with 8-pin modular plugs

 

(straight-through)

Power cable

Power supply with optional power cord (this

 

item is ordered dependent on the type of

 

power supply and cord required for your

 

location)

Attaches to the base of the modem.

Connects the modem ADSL connector to the wall phone jack for access to the Internet.

Connects the modem 10/100BASE-T connector to the LAN through a hub or to a PC NIC.

Connects the modem POWER connector to the local power source.

Screws

Two 6x1/ -inch sheet metal screws

Installs into a wall for wall-mounting modems.

 

2

 

Grey cable

Flat cable with RJ-45 connectors and a DB-9

Connects the RS-232 MGMT port to an ASCII

and adapter

to RJ-45 adapter.

terminal or a PC running terminal emulation

 

 

software. Adapter assembly connects to a DB-9

 

 

connector on the PC. Then, one RJ-45 connector

 

 

installs in the adapter and the other connector

 

 

into the console port on the modem.

 

 

 

100

Megabit Modem 400F, 500L, 600F, and 700F User Manual