Saving the Configuration
Listed in the table below are the default values for the Megabit Modem in PPP over ATM mode. Reference this table to learn the values assigned to the modem after resetting it to factory default.
Parameter | Default Value |
| Parameter | Default Value |
|
|
|
|
|
| System Setup |
| ||
System Mode | PPP over ATM |
| SNMP parameters |
|
|
| |||
TFTP parameters |
|
| Enable trap sending | Not enabled |
TFTP Server IP Address | 192.168.0.2 |
| Trap Server IP Address | 0.0.0.0 |
TFTP Server Net Mask | 255.255.255.0 |
| Trap Server Net Mask | 255.255.255.0 |
TFTP Server Path | blank field |
| Trap Community String | public |
File Name | tiger.bin |
| Get Community String | public |
Admin IP Address | 0.0.0.0 |
| Set Community String | private |
|
|
|
|
|
| PPP Over ATM |
| ||
PPP Over ATM WAN Configuration |
|
| PPP Over ATM LAN Configuration |
|
|
|
| ||
Service Name | blank field |
| IP Address | 192.168.0.1 |
ATM VPI | 0 |
| IP Net Mask | 255.255.255.0 |
ATM VCI | 100 |
| DHCP | Enabled |
Login Name | blank field |
| Start DHCP IP Address | 192.168.0.2 |
Login Password | blank field |
| End DHCP IP Address | 192.168.1.1 |
Chap Host | blank field |
| Primary DNS | 192.168.0.1 |
Address Translation | Enabled |
| Gateway | 192.168.0.1 |
Address Assignment | Dynamic |
| Static NAT Entries (private, proxy, and remote) | |
IP Address | 0.0.0.0 |
| IP Addresses | 0.0.0.0 |
User Assignments (for PPP WAN) |
|
| Ports | 0 |
Service Name | blank field |
| Protocol | UDP |
User’s IP Address | 0.0.0.0 |
|
|
|
|
|
|
|
|
32 | Megabit Modem 400F, 500L, 600F, and 700F User Manual |