Chapter 4: Setting Up For Configuration
Listed in the table below are the default values for the Megabit Modem in Bridge/Router mode. Reference this table to learn the values assigned to the modem after resetting it to factory default.
Parameter | Default Value |
| Parameter | Default Value |
|
|
|
|
|
| Bridge/Router RFC 1483 |
| ||
Brouter WAN Configuration | Not selected |
| Spanning Tree | Selected |
| ||||
Service Name | blank field |
| Brouter LAN Configuration |
|
ATM VPI | 0 |
| Bridging | Enabled |
ATM VCI | 100 |
| Port Priority | 100 |
Bridging | Enabled |
| Routing | Disabled |
Port Priority | 101 |
| RIP Direction | Both |
Routing | Disabled |
| RIP Version | Rip1 |
RIP Direction | Both |
| IP Address | 192.168.0.1 |
RIP Version | Rip1 |
| IP Net Mask | 255.255.255.0 |
IP Address | 0.0.0.0 |
| Default gateway IP Address | 192.168.0.1 |
IP Net Mask | 0.0.0.0 |
| Default gateway IP Net Mask | 255.255.255.0 |
Encapsulation | LLC |
| DHCP | Not enabled |
Static Mac Address Entry | all zeros |
| Start IP Address | 192.168.0.2 |
MAC Address | 0:0:0:0:0:0 |
| End IP Address | 192.168.1.1 |
Source Port | 0 |
| Primary DNS | 192.168.0.1 |
Dest Port | 0 |
| Gateway | 192.168.0.1 |
Static Route Entry | 0.0.0.0 |
|
|
|
(IP Address, IP Network Mask, |
|
|
|
|
Gateway IP Address) |
|
|
|
|
|
|
|
|
|
Megabit Modem 400F, 500L, 600F, and 700F User Manual | 33 |