INSTALLING THE MODEM 3

The Megabit Modem is easy to install by:

•attaching the four adhesive-backed feet

•setting the MDI/MDI-X switch

•connecting a cable from the modem to a PC or an Ethernet hub for LAN service

•connecting a phone cord from the modem to a wall phone jack for DMT ADSL Internet or other types of WAN services

•connecting a power cable to a local power outlet

Perform the installation on the following pages (see “Requirements For The Installation Site” on page 10 to determine where to place modems). Use the parts listed below in the installation procedures.

Part

Function

 

 

 

Installation Kit

 

 

Rubber feet (four)

Attaches to the base of the modem.

Black cable

Connects the modem 10/100BASE-T connector to the LAN through a hub

 

or to a PC NIC. This cable is a straight-through Category 5 cable.

Grey cord

Connects the modem ADSL connector to the RJ-11 wall jack with DMT

 

ADSL service for access to the Internet or other types of WAN applcations.

Power cable

Connects the modem POWER connector to the local power source. Power

 

supply optionally has a power cord. (See “Power Cable” on page 14 for

 

selection options.)

 

 

 

Not In Installation Kit (in ship box)

 

 

Grey cable and

Connects the RS-232 MGMT port to an ASCII terminal or a PC running

adapter

terminal emulation software. Adapter assembly connects to a DB-9

 

connector on the PC. Then, one RJ-45 connector installs in the adapter and

 

the other connector into the console port on the modem.

 

 

Megabit Modem 400F, 500L, 600F, and 700F User Manual

15