Chapter 3: Installing the Modem

1After you have set the MDI/MDI-X switch to the correct position, connect the black cable from the modem 10/100BASE-T port to your PC or hub.

2Connect the grey phone cord from the modem ADSL port to the ADSL wall jack. If your installation requires a splitter or microfilter, refer to the manufacturer’s documentation for further instructions.

3Connect the power cable from the modem power connector to a power outlet.

If you need pinouts for the ADSL and 10/100BASE-T connectors, see “Connector Pinouts” on page 101. For information on how to use the RS-232 management port for maintenance, see “Using the RS-232 Management Port” on page 80.

Megabit Modem 400F, 500L, 600F, and 700F User Manual

19