Chapter 4: Setting Up For Configuration

Saving the Configuration to NVRAM

After clicking Apply at the bottom of a configuration page, the changes are automatically saved to NVRAM. Changes may either take effect immediately or after system reset.

To the right is an example of a configuration change (TFTP server IP address) that only requires you to click Apply for changes to take effect immediately (commit changes to RAM) and be saved to NVRAM.

Below is an example of a configuration change (LAN IP address) that requires both the click of Apply at the configuration screen and a system reset for changes to take effect and to be saved to NVRAM.

1Locate Apply at the bottom of the dialog.

2Click Apply to open the confirmation dialog.

3Click OK to reset the modem.

Megabit Modem 400F, 500L, 600F, and 700F User Manual

29