Chapter 5: Configuring System Settings

1From the system menu, click general to open the General System window.

2Enter the TFTP Server IP address for the device that will be the TFTP server.

3Enter the TFTP Server Net Mask (subnet mask) for the TFTP server.

4Enter the TFTP Server File Path where the updated software resides on the TFTP server (leave blank if the file is stored in the root shared folder on the TFTP server).

5Enter the TFTP Server File Name of the updated software file.

6Click Apply to activate the changes.

Example

The illustration above shows the configuration to access a TFTP server with IP address 192.168.0.2 using a subnet mask of 255.255.255.0. The TFTP server has been set up so that “tiger.bin” has been placed directly inside the shared directory (not in a subdirectory of the shared directory). Therefore, the File Path should be left blank.

Megabit Modem 400F, 500L, 600F, and 700F User Manual

37