Defining Static NAT Entries

DEFINING STATIC NAT ENTRIES

Static NAT entries are used in PPP Over ATM mode. They are required only for applications that use TCP/UDP connections initiated from the remote end (WAN). Through the Static NAT Table, you can map inbound traffic from a remote user to a user or a logical port on your LAN. You can enter a maximum of 32 static NAT entries. See page 87 for more information on NAT and an example application.

1From the system menu, click static NAT table to open the Static NAT Table window.

40

Megabit Modem 400F, 500L, 600F, and 700F User Manual