ADC 600F, 700F CONFIGURING STATIC ROUTES, Add a Static Route, Display Static Routes, Modify a Static Route, system, static route table

Configuring Static Routes

CONFIGURING STATIC ROUTES

Information	Description
Destination	The destination IP address of the packet.
Net Mask	The destination subnet mask of the packet.
Gateway	The next hop IP address the packet will be forwarded to.

Display Static Routes

1From the system menu, click static route table to open the Static Route Table window.

2Observe the list of static routes.

Add a Static Route

1From the system menu, click static route table to open the Static Route Table window.

2Click Add to display the Static Route Entry window.

3Configure the static route parameters as defined above.

4Click Apply to add the new data to the list.

Modify a Static Route

1From the system menu, click static route table to open the Static Route Table window.

2Click Select of the route to be changed.

3Configure the static route parameters as defined above.

4Click OK to change the existing data to the list.

44 Megabit Modem 400F, 500L, 600F, and 700F User Manual