Chapter 6: Configuring PPP Sessions

2Enter the IP address and the Net Mask.

3Click on the box adjacent to the letters DHCP. A check mark in the box indicates the modem's DHCP server is enabled. No check mark in the box indicates the modem's DHCP server is not enabled.

4Click Apply.

Saving the Configuration

Although you have submitted your new system settings, the parameters are not permanent until you write them to NVRAM. See “Saving the Configuration” on page 28 when you want to save to NVRAM.

Megabit Modem 400F, 500L, 600F, and 700F User Manual

59