WHAT YOU NEED TO START 2

This chapter identifies the preparations and prerequisites for installing the Megabit Modem 400F, 500L, 600F, and 700F. Before installing the modem, verify that:

•The contents of the package are accurate as described on this page.

•Your system meets the requirements for connecting to and configuring the modem (see “Requirements For Your System” on page 10).

•Your facility meets the installation site requirements (see “Requirements For The Installation Site” on page 10).

•The configuration parameters are available from your service provider (see “What You Need from Your Service Provider” on page 13).

VERIFY PACKAGE CONTENTS

As you unpack your Megabit Modem, visually inspect the contents for signs of damage. If the equipment was damaged in transit, report the damage to the transportation company and to the sales representative.

Check the contents of the package for the following:

• one black cable

• one grey phone cord

•four rubber, self-adhesive feet

•two screws

•power supply and optional power cord

(see “Power Cable” on page 14 for options)

•grey cable and DB-9 console port adapter

If you need to store the modem for a prolonged period, store it in the original antistatic bag and packaging. Observe environmental specifications as stated on page 97.

Megabit Modem 400F, 500L, 600F, and 700F User Manual

9