8

System Basics

Installing the ICX-250

Installing the ICX-250

The ICX-250 unit can be installed in a rack, on a desktop or attached to a wall using appropriate wall anchors and brackets. It is necessary to read the information that follows to ensure proper reliability of unit.

Choosing a Site for the ICX-250

When choosing a site for your ICX-250 unit make sure that the instructions on installing the unit are followed. Provide adequate ventilation and ample room for cable routing.

Temperature Specifications

Shipping and storage –40 o C to +66o COperating temperature range 0o C to +40o CRelative Humidity 5 to 85% Non-Condensing

Note: The ICX-250 is equipped with a fan to ensure proper cooling and reliability. In the event that the installation environment temperature exceeds the standards above, it is recommended that adjustments

be made. Improper operation outside of these temperatures may result in performance degradation.

Precautionary Procedures

There are several precautions to take before installing and/or servicing the ICX-250 unit.

CAUTION

Never install telephone wiring during a lightning storm.

Never install telephone jacks in wet locations unless the jack is specifically designed for this purpose ONLY.

Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

Use CAUTION when installing or modifying telephone lines.

Never attempt to service this product unless you are an authorized service technician. Doing so can result in injury or damage to the unit and void all warranties.

ADCP-62-023

Issue 1, September 1998

 

© 1998, ADC Telecommunications, Inc.