ADC ICX-250 Idle:, Description:, Factory Setting: IDLE, Idle Immediate/Busy Delay:

28		Configuring the ICX-250																										Switches
FXS Ports - Trunk Conditioning (DIP switches - internal)
																FRONT
																	ON							DIP		S16
																	1	2		3	4	5 6		7	8
	S19				O	N							D		IP		S16
					1		2 3		4 5 6			7			8
					S19
																	ON							DIP		S15
																	1	2	3		4	5	6	7	8
	S18			O	N						D			IP			S15
				1	2 3			4	5 6	7		8
				S18
																	ON							DIP		S14
	S17		ON							DIP							1 2 3				4	5 6		7	8
																	S14										IDLE
			1		2		3 4		5 6	7		8
			S17

ONDIP

1 2 3 4 5 6 7 8

ONDIP

1 2 3 4 5 6 7 8

IDLE/BUSY

S7

S6

S7

ON

DIP

ON

DIP

S6

1

2

3 4 5 6 7 8

1 2

3

4 5 6 7

8

S5

S4

S2

S1

BACK

Description: S6 position 6 and S7 position 6 selects the trunk conditioning state.

Factory Setting: IDLE

Idle: In the event of an alarm condition in the T1 connection to the network, the FXS Ports will be put into the idle state immediately and remain in this condition until the T1 has been restored.

Idle Immediate/Busy Delay: In the event of an alarm condition in the T1 connection between the ICX-250 and the network, the FXS Ports will be put into the Idle state immediately for 3 seconds and then put into the Busy state and remain in this condition until the T1 has been restored.

The DIP switch settings shown in the illustration above are for Switch S6 and S7.

ADCP-62-023 Issue 1, September 1998

© 1998, ADC Telecommunications, Inc.