12 | System Basics | Installing the |
Prior to wall mounting check to see if the environment is stable and free from any extreme temperatures, humidity or vibrations of any sort. The unit should be mounted with the fan to the top with at least 2 inches of clear space on the sides, above, and below for adequate air flow. Allow at least 6 inches for cable clearance and access to switches.
When attaching unit(s) to a wall make sure that appropriate fasteners such as masonry anchors, heavy duty wood screws or expansion bolts are used for heavy objects.
!!ATTENTION!! Set all options prior to installing mounting brackets, top cover cannot be removed once brackets are in place.
Note: Additional support hardware may be necessary (not included with unit) to secure the unit properly to the wall. If the surface is not solid enough to hold the unit and attached cabling, it is recommended that a
small piece of 3/4” plywood be fastened to the wall before attaching the unit. This will help ensure a more stable environment.
A N G LE BR A C K E T
W all
Issue 1, September 1998 | |
| © 1998, ADC Telecommunications, Inc. |