ADC ICX-250 OFF:, ONLY, Swap (ON):, Description:, Factory Setting: OFF

30			Configuring the ICX-250																																							Switches
FXS Ports - FXS Time Slot Assignment (DIP switch - internal)
																							FRONT
																								ON						DIP			S16
																								1	2	3	4	5 6		7	8
	S19					O	N						D		IP									S16
						1		2 3		4 5 6			7	8
						S19
																								ON						DIP			S15
																								1	2	3	4	5	6	7	8
	S18				O	N						D		IP										S15
					1	2 3			4	5 6	7			8
					S18
																								ON						DIP			S14
	S17				ON						DIP													1 2 3			4	5 6		7	8
																								S14
					1	2		3 4		5 6	7		8
					S17																																ON
																																		ON						DIP
																																		1	2 3 4			5	6	7 8
																																		ON						DIP
													S7					S6																1	2	3	4	5	6	7	8
				S7									ON				DIP	ON			DIP			S6													OFF
														1	2	3 4 5 6 7 8		1 2	3	4 5 6 7		8
		S5						S4									S3								S2							S1

BACK

Description: S7 position 8 selects the timeslot assignments.

Factory Setting: OFF

OFF: FXS Ports 1-12 are mapped onto T1 time slots 1-12 and FXS Ports 13-24 are mapped onto T1 time slots 13-24.

Swap (ON): FXS Ports 1-12 are mapped onto T1 time slots 13-24 and FXS Ports 13-24 are mapped onto T1 time slots 1-12. Swap is available only on switch 7 and is applicable only on the 12 port model.

Depending on the services provided by your carrier for voice and data, you may need to reassign the FXS timeslots of the 12 FXS port model. Timeslots 13 to 24 will be assigned in order to allocate data to the lower timeslots.

The DIP switch setting shown in the illustration above is for Switch S7 ONLY.

ADCP-62-023 Issue 1, September 1998

© 1998, ADC Telecommunications, Inc.