ADC ICX-250 ON:, OFF:, Description:, Factory Setting: OFF

Switches																															Configuring the ICX-250								29
FXS Ports - FXS Ringback Tone (DIP switches - internal)
																					FRONT
																						ON						DIP			S16
																						1	2	3	4	5 6		7	8
	S19				O	N							D		IP							S16
					1 2			3	4	5 6			7	8
						S19
																						ON						DIP			S15
																						1	2	3	4	5	6	7	8
	S18			O		N						D		IP								S15
				1 2 3				4	5 6		7			8
				S18
																						ON						DIP			S14
	S17			ON							DIP											1	2	3	4	5 6		7	8
																						S14
				1	2		3 4		5	6	7		8
				S17																														ON
																																ON					DIP
																																1	2	3 4	5	6	7	8
																																ON					DIP
													S7					S6														1	2 3 4		5 6 7			8
			S7										ON				DIP	ON		DIP		S6												OFF
														1	2	3 4 5 6 7 8		1 2	3	8
		S5					S4										S3						S2							S1

BACK

Description: S6 position 7 and S7 position 7 provides ringback tone when it is not available from the PBX or Switch.

Factory Setting: OFF

ON: Ringback tones will be sent to the applicable FXS channels by the unit if not provided by the Switch or PBX for the duration of ringing on the line.

OFF: Ringback provided by PBX or Switch.

The DIP switch settings shown in the illustration above are for Switches S6 and S7.

Issue 1, September 1998 ADCP-62-023

© 1998, ADC Telecommunications, Inc.