Adcom user manual Placing the GDV-870, Inserting the Remote Batteries

Placing the GDV-870 About the Remote Control

Place the GDV-870 on a stable, vibration-free sur- face away from moisture and out of direct sunlight. Your Adcom dealer will be pleased to show you many different types of audio/video equipment racks and cabinets.

Be sure to leave sufficient room behind the rear panel to accommodate cables, power cords, etc. We recommend a minimum of 5 inches of free space for maximum flexibility.

The GDV-870 comes with a full-featured, prepro- grammed, ergonomically designed remote control.

•For an overview of each remote button, see page 8.

Inserting the Remote Batteries

1Remove the cover on the back panel of the re- mote control.

2Insert two AAA alkaline batteries, paying atten- tion to the correct polarities.

3Replace the cover.

Chapter 1 - Welcome

A distance of 1/2” should be maintained around the GDV-870 for ventilation. Keep your GDV-870 in a room where temperatures remain fairly moderate, and never cover it with table cloths, curtains, news- papers, etc., to avoid potential overheating.

Insert two AAA batteries, paying attention to

the correct polarities.

Use within 20 ft. (6m)

UM-4

UM-4

6GDV-870 Owner’s Manual