Chapter 3 - Setup

Audio Settings (cont.)

Digital Audio Output

Sets the audio signal from the coaxial and optical digital audio outputs.

Use the /buttons to select Off, PCM, or All.

-Select “Off” if you are not using the digital audio outputs.

-Select “PCM” (or Pulse Code Modulation) if the digital audio output is connected to a 2- channel digital AV preamp.

-Select “All” if the digital audio output is con- nected to an AV preamp with a Dolby Digital or DTS surround sound processor.

Night Mode

Reduces the dynamic range (the difference between the softest and loudest audio portions) of a DVD sound track. This is a convenient feature for watch- ing movies late at night.

Use the /buttons to select On or Off.

Down Sampling

Down samples high definition audio signals if your AV preamp is not capable of decoding them.

Use the /buttons to select On or Off.

-Select “On” if your preamp is NOT capable of handling 96 kHz signals. The DVD Player will automatically down sample any 96 kHz signals to 48 kHz so your system can decode them.

-Select “Off” if your preamp is capable of handling 96 kHz signals. The DVD Player will pass the signal through without any further processing.

Smart Sound

Provides a variety of preset tone control options by musical genre.

Use the /buttons to select Off, Classical, Rock, Jazz, or Pop.

Language

Bass management

: Off

Front speakers

: Large

 

Video

Center Speakers

: None

 

 

 

Surround Speakers

: None

Audio

Subwoofer

: None

Test tones

: Off

 

Rating

Center delay

: No Delay

Surr. Delay

: No Delay

 

Misc

Digital Output

: PCM

 

 

 

Night Mode

: Off

 

Down sampling

: On

 

Smart Sound

: Off

Notes:

• You can use the Digital

off

on

Audio Out buttons as a

shortcut to enable/dis-

dig audio out

able the digital audio

signal.

22GDV-870 Owner’s Manual

Page 22
Image 22
Adcom GDV-870 user manual Night Mode, Down Sampling, Smart Sound