ADIC 4000, 7000DLT installation and operation guide It means You should, Cleaning Tape LED

	Table 5-6	Using the Cleaning Tape
		If . . .		It means . . .	You should . . .
	While using a data			The drive head needs	Use the cleaning cartridge.
	cartridge, the Use			cleaning or the tape is	Load the cleaning
	Cleaning Tape LED			bad	cartridge according to
	illuminates and the front				Loading the Data Cartridge
	panel LCD displays:				on page 5-12.
					When cleaning is
					complete, the beeper will
	and:				sound alerting you to
					remove the cleaning
					cartridge. Remove the
					cleaning cartridge from the
					drive according to
					Removing the Data Cartridge
					on page 5-14
	While using a data			The data cartridge may	Back up the data from this
	cartridge, the Use			be damaged	cartridge onto another
	Cleaning Tape LED				cartridge, it may be
	begins to blink and the				damaged. A damaged
	front panel LCD				cartridge may cause
	displays:				unnecessary use of the
					cleaning cartridge.
	and
	Use Cleaning Tape LED			Your data cartridge may	Try another data cartridge.
	still illuminates after you			be causing the problem
	clean the drive head.
	Use Cleaning Tape LED			Cleaning has not been	Replace the cleaning
	illuminates after you			accomplished and the	cartridge.
	load the cleaning			cleaning cartridge has no
	cartridge			remaining cycles
				available.
Caution			Using cloth swabs, cotton swabs, cleaning agents, or
			unapproved cleaning cartridges will void your warranty.
			Use only an approved cleaning cartridge.

5-16 Operation and Maintenance

62-0162-01