ADIC 4000, 7000DLT DLT7000 Drive, Figure B-3DLT7000 Tape Drive Connectors Right Side

DLT7000 Drive

If your host computer system does not generate SCSI bus parity, you can disable parity checking in the DLT7000 drive by installing a jumper over two pins on the DFDT connector. See Figure B-3 for location of the connector.

Front

Bezel

TRM PWR Connector

Right Side

DFDT Connector

Figure B-3DLT7000 Tape Drive Connectors (Right Side)

Figure B-4 shows which pins of the DFDT connector have to be jumpered to disable parity.

Disable

Parity

Figure B-4Disable Parity Pins on DFDT Connector

B-4 Drive Configuration62-0162-01