ADIC 7000DLT, 4000 EN 55022 Compliance Czech Republic Only, CE Notice

EN 55022 Compliance (Czech Republic Only)

This device belongs to category B devices as described in EN 55022, unless it is specifically stated that it is a category A device on the specification label. The following applies to devices in category A of EN 55022 (radius of protection up to 30 meters). The user of the device is obliged to take all steps necessary to remove sources of interference to telecom- munication or other devices.

Pokud nenÌ na typovÈm ötitku poËÌtaËe uvedeno, ûe spad· do t¯Ìdy A podle EN 55022, spad· automaticky do t¯Ìdy B podle EN 55022. Pro za¯ÌzenÌ za¯azen· do t¯Ìdy A (ochrannÈ p·smo 30m) podle EN 55022 platÌ n·sledujÌcÌ. Dojde-li k ruöenÌ telekomunikaËnÌch nebo jinych za¯ÌzenÌ, je uûivatel povinen provÈst takov· opat¯enÌ, aby ruöenÌ odstranil.

CE Notice

Marking by the symbol indicates compliance of this tape library to the EMC (Electro-magnetic Compatibility) directive of the European Community. Such marking is indicative that this tape library meets or exceeds the following technical standards:

EN 55022	"Limits and Methods of Measurement of
	Radio Interference Characteristics of
	Information Technology Equipment." This
	system is an EN 55022 Class B device.
EN 50082-1:1997	"Electromagnetic compatibility-
	Genericimmunity standard Part 1: Res-
	idential, commercial, and light industry."
EN 61000-4-2	"Electromagnetic compatibility for
	industrial-process measurement and
	control equipment Part 2: Electrostatic
	discharge requirements." - Severity level 3.
IEC 801-3	"Electromagnetic compatibility for
	industrial-process measurement and

control equipment Part 3: Radiated electromagnetic field requirements." - Severity level 2.

EN 55022 Compliance (Czech Republic Only) C-5