ADT Security Services 200 Plus manual Changing the Time and Date, Time Selection Menu, ? Time

System Programming (cont’d)

Changing the Time and Date

Your FOCUS 200 PLUS security system contains a real-time clock and calendar, which must be programmed at the time of installation. Periodically check the clock and calendar to ensure their accuracy. The time and date may require re-entering if both AC power and battery power have been interrupted or disconnected. If a change is required, complete the steps below.

Changing the Current Time

Note: Before changing the time or date, turn off all BA groups.

1.Using the operating panel’s numeric keypad, enter a valid ID code that has been assigned the privilege level of "Change perm sched" or "Change temp sched."

2.Press More twice to display Action Menu 3.

3.Press Time to display the Time Selection Menu.

Time Selection Menu

? Time:

Holiday Daylight

Open/close Hstg

Quit Current

4.Press Current to display the current time and date settings of the system.

5.Press Change to display the selector buttons “Change time” and “Change date.”

Note: Change will not appear unless all BA groups are off.

–41 –