AIMB-210 User Manual 14
2.1 Introduction
You can access most of the connectors from the top of the board as it is being
installed in the chassis. If you have a number of cards installed or have a packed
chassis, you may need to partially remove the card to make all the connections.
2.2 Parallel Port (LPT1)
The parallel port is normally used to connect the motherboard to a printer. The AIMB-
210 includes an onboard parallel port, accessed through a 25-pin flat-cable connec-
tor, LPT1.
Note! Parallel cable is not enclosed in the box as a standard accessory. The
order part number is 1700008809.