Agilent Technologies 6814B, 6834B, 6843A manual Front Panel Operation, Display, Command Function

Shift

Phase

Front Panel Operation - 4

Press this key to access the phase menu list.

Display	Command Function
PHASE <value>	Set immediate output phase (φ)
PHASE:T <value>	Set triggered output phase (φ)
PHASE:M <char>	Select the phase mode (φ) (FIXED, STEP, PULSE or LIST)

Shape

Press this key to access the shape menu list.

Display	Command Function
SHAPE <char>	Select the immediate output wave shape 1 (SINE, SQUARE,
	or CSINE) CSIN = clipped sine wave
SHAPE:T <char>	Select the triggered output wave shape (SINE, SQUARE, or
	CSINE) CSIN = clipped sine wave
SHAPE:M <char>	Select the shape mode (FIXED, STEP, PULSE or LIST)
CLIP <value>	Set the clipping level of the CSIN wave shape. This
	specifies the point where clipping starts as a percentage of
	the peak amplitude or percentage of THD.

Pulse

Press this key to access the pulse menu list.

Display	Command Function
WIDTH <value>	Set the pulse width
COUNT <value>	Set the number of output pulses
DCYCLE <value>	Set the pulse duty cycle as a percentage of the pulse period
PER <value>	Set the pulse period
HOLD <char>	Set the parameter that will be held constant as the other
	parameters change (WIDTH or DCYCLE)

Shift

Output

Press this key to access the output menu list.

Display	Command Function
*RST	Execute *RST command to place the ac source in the
	factory-default state
TTLT:SOUR <char>	Select Trigger Out source coupling (BOT, EOT or LIST)
	BOT = beginning of transient
	EOT = end of transient
	LIST = TTLT trigger (see Programming Guide)
TTLT:STATE <value>	Set Trigger Out state (ON or OFF)
PON:STATE <char>	Select power-on state command (RST or RCL0)
RI <char>	Sets remote inhibit mode (LATCHING, LIVE, or OFF)
DFI <char>	Sets discrete fault indicator state (ON or OFF)
DFI:SOUR <char>	Select the DFI source (QUES, OPER, ESB, RQS, or OFF)
	(see Chapter 4 of Programming Guide)

Notes:

1 User defined waveshapes will also appear in this list when created. φ = phase selectable on Agilent 6834B

value = a numeric value
char = a character string parameter
p	and	q	scroll through the command list.
Ø		￿
	and		scroll through the parameter list.

37