General Tasks
1Set up your printer or plotter if you haven’t already done so.
2Select the output format and device type:
Press [Plot/Print], [output fmt] and select the desired format.
Press [device defaults] and select a device if you want other than the default.
3Select the type of output port:
Press [Plot/Print], [output to]
and select the port to which your printer or plotter is attached.
4Press [Local/Setup], [system controller].
5Press [Plot/Print], [start plot/print]
The analyzer is only able to initiate printing or plotting if it is attached to a printer or plotter and is designated as the system controller. If you haven’t already set up your printer or plotter, see “To set up peripherals.” All of the screen’s contents, except the softkey labels, are printed when you complete this task.
You may select various parameters under the [plot item] and [plot/print setup] softkeys depending on your particular peripheral. To learn more about these parameters, display online help for the relevant softkeys.
You must use the PLOT/PRINT menu to select the correct type of device and port before starting a plot or print of the screen contents.
With a plotter, you can elect to plot portions of the display
You can control certain device options, depending on your output device
6 - 3
