Preparing the Analyzer for Use
To connect the analyzer to a LAN
Analyzers with option UFG, 4 megabyte extended RAM and additional I/O, have a ThinLAN and AUI (attachment unit interface) port for connecting the analyzer to the LAN (local area network).
1Set the power switch to off ( O ).
2Connect the ThinLAN BNC cable to the ThinLAN port or the appropriate media access unit (MAU) to the AUI port.
3Set the power switch to on ( l ).
4Press the following keys:
[Local/Setup]
[LAN port setup]
[port select ThinLAN (BNC)] or [port select AUI (MAU)] [IP address]
internet protocol address [Return]
[LAN
See your LAN system administrator for the internet protocol address. Your LAN system administrator can also tell you if you need to set the gateway address or subnet mask.
