Preparing the Analyzer for Use
lTo transport the analyzer
Disconnect the IF section from the RF section and package each section using the original factory packaging or packaging identical to the factory packaging. Containers and materials identical to those used in factory packaging are
lavailable through
If returning the analyzer to
Type of service required Return address
lModel number Full serial number
In any correspondence, refer to the analyzer by model number and both serial numbers.
lMark the containers FRAGILE to ensure careful handling.
If necessary to package the analyzer in containers other than original packaging, observe the following (use of other packaging is not recommended):
Wrap each section in heavy paper or
lUse
Caution | Do not use styrene pellets in any shape as packing material for the analyzer. |
| The pellets do not adequately cushion the analyzer and do not prevent the |
| analyzer from shifting in the carton. In addition, the pellets create static |
| electricity which can damage electronic components. |
|
|