Agilent Technologies DC211, DP240, DP212 Control Panel and Functions, Control Panel Mode, Dso Tr

Models: DC140 DC110 DC211 DC135 DP105 DP106 DP211 DP235 DP210 DP111 DP1400 DP110 DP214 DP212 DP240

1 66
Download 66 pages 37.45 Kb
Page 42
Image 42
4.2.Control Panel and Functions

Other controls in the control panel allow you to select the optimal acquisition settings for your particular signal. Each of the other control panel functions will be discussed in detail in the following Control Panel Functions section. Here is a sample result.

4.2.Control Panel and Functions

DSO TR

4.2.1. Control Panel Mode

 

In AcqirisLive there are two control panel modes available, Oscilloscope Mode and Transient

 

Recorder Mode. The choice of mode is entirely determined by the preference of the user.

Both modes provide the same set of functional capabilities but display the settings slightly differently. For example in Transient Recorder Mode, the user selects the Full Scale Range of the amplifier whereas in Oscilloscope Mode the user selects the input voltage scale set in Volts/Div. The desired mode is selected using one of the two buttons shown at the top of the control panel. The distinction between the control panels for the two operating modes can be seen in the images below.

In both modes it is possible to set the memory depth and the sample speed independently within the limits of the maximum available memory. However the two modes differ in the following way.

In Oscilloscope Mode, the user selects the time window (time per div) and the sampling rate will be adjusted to the fastest possible within the limits of the available memory. The maximum available memory is programmable.

In Transient Recorder Mode, the user selects the capture time window, the sampling rate, or the number of samples. When selecting the capture time window, the number of samples is adapted, keeping the current sampling rate and number of segments, up to the maximum available memory on the card. When selecting the sampling rate, the number of samples is adapted, keeping the current capture time window and number of segments, up to the maximum available memory on the card. When selecting the number of samples, the capture time window is adapted, keeping the current sampling rate and number of segments.

User Manual: Family of 8-bit Digitizers

Page 42 of 66

Page 42
Image 42
Agilent Technologies DC211, DP240, DP212, DP214, DP110, DP1400, DP111 Control Panel and Functions, Control Panel Mode, Dso Tr