Agilent Technologies manual E9300/1B Conditions Zero Set Zero Drift2 Measurement

E9300/1B and H Power Sensor Specifications

	Error
Offset at Switch Point	≤± 0.5% (≤± 0.02 dB) typical

Switching Point Hysteresis

0.5 dB typical

E9300/1B	Conditions	Zero Set		Zero Drift2	Measurement
	(RH)1				Noise3
Lower Range	15% to 75%	500 nW		150 nW	700 nW
(-30 to	75% to 95%	500 nW		4 ∝ W	700 nW
+20 dBm)
Upper Range	15% to 75%	500 ∝ W		150 ∝ W	500 ∝ W
(+20 to	75% to 95%	500 ∝ W		3 mW	500 ∝ W
+44 dBm)
E9300/1H
Lower Range	15% to 75%	5 nW		1.5 nW	7 nW
(-50 to 0 dBm)	75% to 95%	5 nW		40 nW	7 nW
Upper Range	15% to 75%	5 ∝	W	1.5 ∝ W	5 ∝	W
(0 to +30 dBm)	75% to 95%	5 ∝	W	30 ∝ W	5 ∝	W

1.RH is the abbreviation for Relative Humidity.

2.Within 1 hour after zero set, at a constant temperature, after a 24 hour warm-up of the power meter with sensor connected.

3.The number of averages at 16 for Normal mode and 32 for x2 mode, at a constant temperature, measured over a one minute interval and two standard deviations.

52