Agilent Technologies E9300 manual Typical Power Linearity at 25C, after zero

E9300/1/4/A Power Sensor Specifications

% Error
1
0.8
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
-1
-30	-25	-20	-15	-10	-5	0	5	10	15	20
					Power (dBm)

Figure 12 Typical Power Linearity at 25°C, after zero and

	calibration, with associated Measurement Uncertainty
		-30 to	-20 to	-10 to	0 to	10 to
		-20 dBm	-10 dBm	0 dBm	10 dBm	20 dBm
	Measurement	± 0.9%	± 0.8%	± 0.65%	± 0.55%	± 0.45%
	Uncertainty
Note	If the temperature changes after calibration and you choose not to
	re-calibrate the sensor, Additional Power Linearity Error (next
	table) should be added to the Power Linearity specifications shown

above. The typical maximum Additional Power Linearity error due to temperature change after calibration at 25°C, for small changes in temperature, is ±0.15 %/°C (valid after zeroing the sensor).

For larger changes refer to the following table.

37