Preparing the remote control

VCR reception setting

When using the VCR, the signal passes from the antenna to the VCR and then out to the TV. Before you use the VCR, a video output channel must be set on your TV.

AERIAL

(VHF/UHF)

RF OUT

3CH 4CH

TV/VCR

Inserting the batteries

Caution

To prevent damage from leakage or explosion, follow the descriptions below.

•Insert two supplied R03 (size AAA) batteries with the 0 and 9 marks correctly as illustrated.

•Do not mix old batteries with new ones or different types of batteries.

•Do not throw the batteries into a fire, apply heat to them or take them apart.

•Do not carry the batteries with keys or other metallic objects.

Note

Remove the batteries when they have no more power, or when you do not use the remote control for a long period of time.

Using the remote control

Point the remote control toward remote sensor.

When a TV is connected with an antenna cable

When the TV is connected to the RF OUT connector using a supplied antenna cable, set the channel selector at the rear to 3 CH or 4 CH, not employed for broadcasts, and select the same channel on the TV.

(For watching the VCR, set channel 3 ch or 4 ch on the TV.)

To select a desired TV channel on the TV

Turn the TV on and turn off this VCR.

To see a TV program or video program selected on the

VCR

Turn the TV and VCR on, and press TV/VCR to display VCR in the display window.

VCR

When a TV is connected with audio and video cables

When the TV is connected using the supplied audio and video cables, turn the TV and VCR on, and select the video input mode on the TV.

5 m

30	Remote sensor
30	Remote sensor
7 m

Notes

•The remote control may not operate when there is any obstruction between the remote control and remote sensor.

•Strong ambient light sources such as a fluorescent lamp or direct sunlight may cause unreliable operation.

•Using a TV with the same type of infrared remote control facing the same direction may cause incorrect operation.

•The maximum distance for effective control between the remote control and remote sensor is 7 meters. When the maximum operable distance becomes shorter, replace both batteries with new ones.

•Although you can use the remote control within an angle of up to 30 degrees in any direction from directly in front of remote sensor, we recommend a narrower angle for stable operation.

CONTINUE