Aiwa HV-FX9000U Recording a TV program, To stop recording, To pause recording

RECORDING

Recording a TV program

3 Press CHANNEL i or k on the remote control, CHANNEL N or M on the VCR, or number buttons to select the channel to record.

TV/VCR

wREC/ITR

aPAUSE/STILL

VCR /CATV/DBS/ TV

Number buttons

OTPB

0/INPUT

sSTOP

CHANNEL i/k

SPEED

If you use the number buttons, it will take a few seconds after you have pressed the buttons for the channel to change.

4 Press w REC/ITR to start recording.

“V.MARK” flashes on the TV screen when marking an index signal.

To stop recording

Press s STOP.

To pause recording

Press a PAUSE/STILL. “RECP” appears on the TV screen. To resume recording, press a PAUSE/STILL again.

To prevent an accidental recording

Break off the erasure prevention tab on the back edge of the cassette.

To record over the tape again, cover the gap with adhesive tape.

Adhesive tape

aPAUSE/ sSTOP

CHANNEL wREC/ITR STILL N/M

ONE-TOUCH PLAY BACK

Before starting

•Turn on your TV and see it for the VCR reception.

•Set the VCR /CATV/DBS/ TV selector to VCR.

1 Insert a cassette with its erasure prevention tab in place.

The power turns on automatically.

Erasure prevention tab

To watch another TV program while recording

Press TV/VCR after starting the recording so that “VCR” in the display window disappears. Then select another channel on the TV.

To monitor the recording, set the channel on the TV to that of the CHANNEL selector, and press TV/VCR again.

2 Press SPEED to select the tape speed, SP or EP.

STOP

SP

EP provides three times as much recording time as SP, although SP produces better picture and audio sounds.

Tips

•If you want to record the program through the line input, press 0/INPUT,CHANNEL i, k on the remote control, CHANNEL N or M on the VCR continuously to display “LINE1” (from AUDIO/VIDEO IN jacks at the rear) or “LINE2” (from the AUDIO/VIDEO IN jacks in the front) in the display

window in step 3.

•To start recording during playback, press a PAUSE/STILL, and w REC/ITR, then a PAUSE/STILL.

Notes

•If you try to record on a cassette without its erasure prevention tab, the VCR will eject the cassette.

•If recording pause lasts for more than 5 minutes, the VCR will automatically enter stop mode to protect the tape.

•When using the 0/INPUT button to select the input channel, press 0/INPUT twice.

•The channel cannot be changed during recording.

19 ENGLISH