Aiwa HV-FX9000U To extend the recording time, If the program overlaps another

3 Press ENTER/DISPLAY.

•The timer information appears on the TV screen.

•If you want to extend the recording time, see “To extend the recording time” below.

PROGRAM		1
MONTH	: JULY
DAY	:		7 FRI
START	:		6 : 30 AM
STOP	:		7 : 30 AM
CHANNEL :		41 TV
SPEED	: AUTO
REPEAT	: ONCE

TO ERASE PRESS CLEAR

TO EXIT PRESS MENU

4 Press i or k to select SPEED, then press j or l to select the tape speed, SP, EP or AUTO.

If you select AUTO, the VCR determines remaining tape length and switches the speed from SP to EP, if necessary, to complete recording the program.

	PROGRAM		1
	MONTH	: JULY
	DAY	:	7 FRI
	START	:	6 : 30 AM
	STOP	:	7 : 30 AM
	CHANNEL :		41 TV
	SPEED	: SP
	REPEAT	: ONCE
SELECT			ADJUST

TO EXIT PRESS MENU

5 Press i or k to select REPEAT, then press j or l to select ONCE, WEEKLY or DAILY.

ONCE: for a single program

WEEKLY: for a weekly program such as every Friday

DAILY: for a daily program from Monday to Friday

PROGRAM		1
MONTH	: JULY
DAY	:	7 FRI
START	:	6 : 30 AM
STOP	:	7 : 30 AM
CHANNEL :		41 TV
SPEED	: AUTO

REPEAT : ONCE

SELECT ADJUST

TO EXIT PRESS MENU

6 If you want to set another program, repeat from step 1.

7 Press MENU to return to the normal screen.

8 Press POWER to turn off the VCR.

•“TIMER” appears in the display window, and the VCR stands by for timer recording.

•If the cassette-in indicator flashes, a cassette is not inserted. If the cassette-in indicator flashes and the cassette is ejected, the cassette’s erasure prevention tab is removed.

To extend the recording time

After step 3, press i or k to select STOP, then press j or l to change the end time.

If the program overlaps another

The overlapped portions will be deleted. The program which has a lower program number has priority over the succeeding as illustrated.

8:00 9:00 10:00 11:00

Program 1

Program 2
		Deleted Parts
Program 3
Actual
recorded	Prog.1	Prog.2	Prog.3
portions

To cancel the program

Press MENU and select PROGRAM by pressing the i or k button. And press j or l to display the program you want to cancel, then press CLEAR to cancel.

Tips

•If “FULLY PROGRAMMED” flashes and the setting of PROGRAM 1 appears. 8 programs are already set. Cancel an unnecessary program.

•To confirm the settings, select PROGRAM in the menu.

Then press j or l to display the settings of each program. Press MENU to return to the normal screen.

Notes

•When the power supply is interrupted for more than 60 minutes, the preset program is cleared. In this case, you have to set the timer again.

•The VCR may not work correctly when you use a T-210 tape, even if you select AUTO in step 4.

•When the tape reaches the end during timer recording, “TIMER” flashes in the display window.

•If you make an irregular setting, “ERROR CODE” flashes on the TV screen.

ENGLISH 22