Aiwa HV-FX9000U Setting the timer manually, To correct the data while setting

Setting the timer manually

If you cannot use VCR Plus+ system, you can set the timer manually.

You can set up to 8 programs within one year of the current date.

POWER	VCR /CATV/
	DBS/ TV

j/l

i/k

ENTER/DISPLAY

CLEAR

MENU

Before starting

•Check that the VCR clock is set correctly.

•Insert a cassette with its erasure prevention tab in place.

•Set the VCR/CATV/DBS/TV selector to VCR.

•If the CATV converter is used for the timer recording, check that the CATV (or satellite) converter is turned on and the channel you want to record is selected.

1 Press MENU.

2 Press i or k to select PROGRAM, then press

ENTER/DISPLAY.

CLOCK

PROGRAM

TUNING

SETUP

SELECT ENTER ENTER

TO EXIT PRESS MENU

3 Press i or k to select MONTH, then press j or l to set the month.

Press and hold j or lto change the setting rapidly.

	PROGRAM	1
	MONTH	: JULY
	DAY	:
	START	:
	STOP	:
	CHANNEL :
	SPEED	:
	REPEAT	:
SELECT			ADJUST

TO EXIT PRESS MENU

4 Set DAY, START time and STOP time as in step 3.

	PROGRAM		1
	MONTH	:	JULY
	DAY	:	3 MON
	START	:	6 : 00 PM
	STOP	:	7 : 30 PM
	CHANNEL :
	SPEED	:
	REPEAT	:
SELECT			ADJUST

TO EXIT PRESS MENU

5 Press i or k to select CHANNEL, press j or l to set the VCR channel number.

If you have connected the CATV using the CATV

converter, set the CHANNEL to match the cable box output channel (usually CH3 or 4). Change the channel

on the CATV converter instead of the VCR.

	PROGRAM		1
	MONTH	:	JULY
	DAY	:	3	MON
	START	:	6 : 00 PM
	STOP	:	7 : 30 PM
	CHANNEL :		4	CATV
	SPEED	:	AUTO
	REPEAT	:	ONCE
SELECT			ADJUST

TO EXIT PRESS MENU

6 Set SPEED and REPEAT as in step 3.

For details of SPEED and REPEAT, see “Setting the timer with VCR Plus+ system” on page 21.

PROGRAM		1
MONTH	:	JULY
DAY	:	3 MON
START	:	6 : 00 PM
STOP	:	7 : 30 PM
CHANNEL :		4 CATV
SPEED	: SP
REPEAT	:	ONCE

SELECT ADJUST

TO EXIT PRESS MENU

7 If you want to set another program, press k to select PROGRAM, then press j or l to display another program number. And repeat steps 3 through 7.

8 Press MENU to return to the normal screen.

9 Press POWER to turn off the VCR.

•“TIMER” appears in the display window, and the VCR stands by for timer recording.

•If the cassette-in indicator flashes, a cassette is not inserted. If the cassette-in indicator flashes and the cassette is ejected, the cassette’s erasure prevention tab is removed.

To correct the data while setting

Press i or k until the item you want to correct highlights, then press j or l to set the correct data.

To cancel the program

Select PROGRAM in the menu. And press j or l to display the program you want to cancel, then press CLEAR to cancel.

Tips

•If “FULLY PROGRAMMED” flashes and the setting of PROGRAM 1 appears. 8 programs are already set. Cancel an unnecessary program.

•To confirm the settings, select PROGRAM in the menu. Then press j or l to display the settings of each program. Press MENU to return to the normal screen.

•If you want to record the program through the line input, press jor l to display “LINE1” (from the AUDIO/VIDEO IN jacks at the rear) or “LINE2” (from the AUDIO/VIDEO IN jacks in the front) in step 5 instead of the VCR channel number.

Notes

•When the power supply is interrupted for more than 60 minutes, the preset program is cleared. In this case, you have to set the timer again.

•When the tape reaches the end during timer recording, “TIMER” flashes in the display window.

•The VCR may not work correctly when you use a T-210 tape, even if you select AUTO in step 6.

23 ENGLISH