Aiwa HV-FX9000U operating instructions Various search functions, To skip an advertisement

Playing back a tape (continued)

POWER

zEJECT

fREW/[ gF FWD/] aPAUSE/STILL

CHANNEL i/k

AD-SKIP

TRACKING +/-

Various search functions

	VCR/CATV/
	DBS/TV
	Number
	buttons
CPLAY
fREW/[	gF FWD/]
	sSTOP
SLOW	CHANNEL i/k
ENTER/DISPLAY
CLEAR	VISS
ZERO {
REC.END	TRACKING +/-
SEARCH

To watch the picture of a tape during fast- forward or rewind — Skip search

Hold down g F FWD/] or f REW/[ during fast- forward or rewind. The VCR switches forward or reverse

search.

Release the button to return to fast-forward or rewind mode.

To skip an advertisement

Press AD-SKIP during playback. The VCR searches forward approximately 30 seconds of the recorded time.

Each press changes the recorded time of forward search in 30 seconds increments to a maximum of 3 minutes.

After forward search, VCR returns to the normal playback.

During AD-skip, the counter does not register blank portions with no recorded signal.

To turn off the VCR automatically after rewinding

Press POWER during rewind. REW flashes on the TV screen. The VCR turns the power off after rewinding the tape to the beginning.

Tips

•If you press z EJECT while the power is off, the VCR automatically turns the power on, ejects the cassette, and turns the power off.

•You can adjust unstable pictures by pressing the TRACKING + or – button repeatedly during still.

•Depending on the tape, noise lines may appear or color may fade during still and slow motion playback. You can remove the noise lines by pressing the TRACKING +, – on the remote control, CHANNEL Nor Mon the VCR repeatedly.

•Noise lines may appear or color may fade during forward, and reverse searches. You can remove the lines by pressing the TRACKING + or – button repeatedly.

Notes

•If a still picture lasts for more than 5 minutes, the VCR will automatically enter stop mode to protect the tape.

•If forward, reverse searches and slow motion playback last for 3 minutes, the VCR will automatically enter playback mode to protect the tape.

•The sound will be muted during forward, reverse searches and still.

Before starting

Set the VCR/CATV/DBS/TV selector to VCR.

Rewinding or fast-forwarding to a specific point — Zero Return

1 Press CLEAR at the point you want to locate later.

•The tape counter in the display window resets to “0:00:00.”

•If the clock display appears in the display window, press ENTER/DISPLAY repeatedly.

REC TIMER VCR M REM BILSAP Hi-FiST

SP LP EP

2 After playback or recording, press s STOP, then ZERO {.

The tape automatically stops when the tape counter returns to about “0:00:00.”

Tip

You can also see the tape counter in the TV screen. Press ENTER/DISPLAY repeatedly until the tape counter appears.

Notes

•When you insert a cassette, the tape counter is reset to “0:00:00.”

•The tape counter not work while playing unrecorded portions of a tape.

17 ENGLISH