Aiwa XD-SPM823 operating instructions Connecting to a TV equipped with an S-video input connector

Connections (continued)

A-2 Connecting to a TV equipped with an S-video input connector

Rear of the TV

S-video input connector (S1, S2)

S-video cord (not supplied)

Set the VIDEO OUT switch to S-VIDEO

Rear of the unit	to S-VIDEO OUT connector
	VIDEO OUT				COMPONENT/
	OPTICAL				PROGRESSIVE SCAN
		Y			S-VIDEO
	DIGITAL OUT
				S-VIDEO	VIDEO
	L	PR/CR	L	OUT	OUT
	R PB/CB		R	COAXIAL
	AUDIO	COMPONENT	AUDIO	DIGITAL
		VIDEO OUT/
	OUT1	PROGRESSIVE	OUT2	OUT

SCAN

to an AC outlet

Set the VIDEO OUTPUT switch before connecting

Set the VIDEO OUTPUT switch to "S-VIDEO" before connecting to a TV with an S-video input connector.

Set the setup menu correctly after connecting

Set the "TV Aspect" in the setup menu according to the TV connected to the unit as follows:

(See "Changing Setup Values" on page 46 for details.)

TV Aspect

When the TV has a conventional 4:3 screen: 4:3 Letterbox or 4:3 Panscan

When the TV has a wide 16:9 screen: 16:9 Wide

NOTE

For the best possible picture clarity, it is recommended that an S (separate) video cord (not supplied) be used when connecting the unit to a TV equipped with an S-video input connector.

16 ENGLISH