Aiwa XD-SPM823 operating instructions Progressive Scan, Digital Audio Output, Lright cursor button

Changing Setup Values (continued)

Progressive Scan

When connecting the unit to a progressive-scan compatible TV, you can take advantage of the unit's progressive scan output enabling high quality video playback with less flickers.

CAUTION

DO NOT set the "Progressive Scan" to "On" when connecting to a TV that is not compatible with progressive scan signals. If you set "Progressive Scan" to "On" in error, the picture will appear scrambled. In this case, reset the unit by holding down s for more than 5 seconds in stop mode. The original video output will be restored and the picture will become visible again.

Digital Audio Output

Set the audio output of the unit according to the type of audio equipment connected to the unit.

CAUTION

DO NOT select "DOLBY DIGITAL/PCM" or "Stream/PCM" for the "Digital Audio Output" when connecting to an AV receiver not equipped with a Dolby Digital decoder or DTS decoder (with an optical or coaxial connecting cord).

Merely attempting to play a disc may cause a screeching noise which could be harmful to your ears and damage the speakers. In this case, be sure to select "PCM" for the "Digital Audio Output".

1 Press i/k to select "Progressive

Scan" in the setup menu and press the lright cursor button.

Disc Audio	Off
Disc Subtitle	On
Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

	Others
2
	Press i/kto select "On" or "Off" and
	press SELECT/ENTER.

On:

You can change the setting to "On" when using the COMPONENT VIDEO OUT/PROGRESSIVE SCAN jacks on the unit for connection to a TV compatible with progressive scan signals.

Off:

–Do not change the setting (keep the setting "Off") when using the COMPONENT VIDEO OUT/PROGRESSIVE SCAN jacks on the unit for connection to a TV which is not compatible with progressive scan signals.

–Do not change the setting (keep the setting "Off") when using the VIDEO OUT jack or S-VIDEO OUT jack on the unit for connection to a TV.

NOTES

•The Progressive Scan menu item is not displayed when the VIDEO OUTPUT switch is set to "S-VIDEO".

•Composite video signals are not output from the VIDEO OUT jack on the unit if "Progressive Scan" is set to "On".

1	Press i/k to select "Digital Audio
	Output" in the setup menu and press
	the lright cursor button.

Disc Audio	DIGITALDOLBY /PCM
Disc Subtitle	Stream/PCM
Disc Menu	PCM
Rating
Country Code	Sample Freq.
TV Aspect	48KHz
Menu Language	96KHz
Progressive Scan
Digital Audio Output
Others

2	Press i/kto select the appropriate
	setting and press SELECT/ENTER.

DOLBY DIGITAL/PCM:

Select this when connecting to an AV receiver equipped with a Dolby Digital (AC-3) decoder.

Stream/PCM:

Select this when connecting to an AV receiver equipped with a DTS decoder or an MPEG decoder, or an AV receiver equipped with both Dolby Digital and DTS decoders.

PCM:

Select this when connecting to an audio system without a Dolby Digital (AC-3), DTS or other special decoder.

52 ENGLISH