Aiwa XD-SPM823 Search, Mark search, To mark a desired point, To clear a marked point

Search (continued)

MARKSEARCH

Number	CLEAR
buttons

SELECT/ENTER

jl

Mark search

You can start playback from a desired marked point. Up to 9 points can be marked on the same disc.

To mark a desired point

During playback, press MARK at a position to be memorized as marked point.

1/9

Marked point 1 is memorized.

Each time you press MARK, an additional point is marked.

To start playback from a marked point

1
	Press SEARCH during playback or in
	stop mode.

The mark search menu appears on the TV screen.

MARKER SEARCH

1 2 3 4 5 – – – –

2 Within 10 seconds, press j/l to select a marked point you want to recall.

3 Press SELECT/ENTER.

Playback starts from the selected marked point.

In step 2, you can also use the number buttons (1 - 9) to specify a marked point.

Playback starts immediately without your pressing

SELECT/ENTER.

To clear a marked point

In step 2 above, select the marked point you want to clear, then press CLEAR.

NOTES

•It may be prohibited to mark a point at multi-angle scenes or where subtitles are recorded.

•All the marked points are cleared when:

-you turn off the power.

-you remove the disc.

-you select another disc tray.

32 ENGLISH