E Connecting to a TV and an AV receiver equipped with a DTS decoder
Rear of the unit
TV
yellow
to the video input jack (yellow)
Video cord (supplied)
yellow 
to VIDEO OUT jack (yellow)
VIDEO OUT |
|
|
| COMPONENT/ |
OPTICAL |
|
|
| PROGRESSIVE SCAN |
| Y |
|
| |
DIGITAL OUT |
|
|
| |
|
| VIDEO | ||
L | PR/CR | L | OUT | OUT |
|
| |||
R | PB/CB | R | COAXIAL |
|
AUDIO | COMPONENT | AUDIO | DIGITAL |
|
VIDEO OUT/ |
| |||
OUT1 | PROGRESSIVE | OUT2 | OUT |
|
| SCAN |
|
|
|
PREPARATIONS
to an AC outlet
to DIGITAL OUT OPTICAL jack
Optical cord (not supplied)
to the digital input jack
to DIGITAL OUT COAXIAL jack
Coaxial cord (not supplied)
Receiver equipped with a DTS decoder
Front speaker (L) |
|
| Front speaker (R) |
Surround speaker (L) | Center speaker | Subwoofer | Surround speaker (R) |
En
Set the setup menu correctly after connecting
Set the "TV Aspect" and "Digital Audio Output" in the setup menu according to the TV and audio equipment connected to the unit as follows:
(See "Changing Setup Values" on page 46 for details.)
TV Aspect
When the TV has a conventional 4:3 screen: 4:3 Letterbox or 4:3 Panscan
When the TV has a wide 16:9 screen: 16:9 Wide
Digital Audio Output
Stream/PCM
CAUTION
DO NOT select "Stream/PCM" for the "Digital Audio Output" in the setup menu when connecting to an AV receiver not equipped with a DTS decoder (with an optical or coaxial connecting cord).
Merely attempting to play a disc may cause a screeching noise which could be harmful to your ears and damage the speakers. In this case, be sure to select "PCM" for the "Digital Audio Output".
CONTINUE
ENGLISH 21
