
TV or monitor
red
blue
to the video input jacks (Y: green, PR/CR: red, PB/CB: blue)
Video cables (not supplied)
green
to COMPONENT VIDEO
OUT/PROGRESSIVE SCAN Set the VIDEO OUT switch to
PREPARATIONS
Rear of the unit
VIDEO OUT
OPTICAL
Y
DIGITAL OUT
L PR/CR
R PB/CB
COMPONENT
AUDIO VIDEO OUT/
OUT1 PROGRESSIVE
SCAN
(Y, PR/CR, PB/CB) jacks
COMPONENT/
PROGRESSIVE SCAN
OUT OUT
L
RCOAXIAL
AUDIO DIGITAL
OUT2OUT
COMPONENT/PROGRESSIVE SCAN
to an AC outlet
Set the VIDEO OUTPUT switch before connecting
Set the VIDEO OUTPUT switch to "COMPONENT/ PROGRESSIVE SCAN" before connecting to a TV with component input connectors.
Set the setup menu correctly after connecting
Set the "TV Aspect" and "Progressive Scan" in the setup menu according to the TV connected to the unit as follows: (See "Changing Setup Values" on page 46 for details.)
TV Aspect
When the TV has a conventional 4:3 screen: 4:3 Letterbox or 4:3 Panscan
When the TV has a wide 16:9 screen: 16:9 Wide
Progressive Scan
When the TV is compatible with progressive scan signals: On
When the TV is not compatible with progressive scan signals:
Off
CAUTION |
|
| |
DO NOT set the "Progressive Scan" in the setup menu |
|
| |
to "On" when connecting to a TV that is not compatible |
|
| |
| |||
with progressive scan signals. If you set "Progressive |
| En | |
Scan" to "On" in error, the picture will appear scrambled. |
| ||
In this case, reset the unit by holding down s for more |
|
| |
| |||
than 5 seconds in stop mode. The original video output |
|
| |
will be restored and the picture will become visible again. |
|
| |
|
|
|
|
|
| ||
NOTE |
|
| |
Composite video signals are not output from the VIDEO |
| ||
OUT jack on the unit if "Progressive Scan" is set to "On". |
|
CONTINUE
ENGLISH 17