PFIESETTING STATIONS

The unit can store a total of 32 preset stations. (Each band has a maximum of 20 available preset stations. ) When a station is stored, a preset number is assigned to the station. Use the preset num~er to tune in to a preset station directly.

1 Press the TUNER/BAND button to select a band.

Then, press the ++ or - button to select a station.

2 Press the 11 button to store the station.

A station is assigned a preset number, beginning from 1 in consecutive order for each band.

Preset number

3 Repeat steps 1 and 2.

The next station will not be stored if a total of 32 preset stations have already been stored.

PRESET NUMBER TUNING

Use the remote control to select the preset number directly.

1 Press the TUNER/BAND button to select a band.

2 Press the numbered buttons to select a preset number.

Example:

To select preset number 15, press the +1 O and 5 buttons. To select preset number 10, press the +1 O and O buttons.

Other methods to tune in to a preset station

Press the TUNER/BAND button to select a band.

Then follow any one of the methods described below to select a station.

. Press the + button repeatedly.

Press the E button on the remote control repeatedly.

Each time the button is pressed, station with the next higher number is selected.

Turn the MULTI JOG dial.

“Turningthe dial right selects the next higher number. Turning it left selects the next lower number.

To clear a preset station

Select the preset number of the station to be cleared. Then, press the button, and press the II button within 4 seconds. The preset numbers of all other stations in the band with higher numbers are also decreased by one.

ENGLISH 8

Page 9
Image 9
Aiwa XR-M35 manual Pfiesetting Stations, Preset Number Tuning, Repeat steps 1, Other methods to tune in to a preset station