Aiwa XR-M35 Music Sensor, When the D indicator on the display is appearing, press the, English I

MUSIC SENSOR

If there is a 4-second or longer blank between each track, a search for the beginning of the current or next track during playl]ack can be done easily.

When the D indicator on the display is appearing, press the

*button to move to the next track or the << button to move to the beginning of the current track,

When the U indicator on the display is appearing, press the 44 button to move to the next track, or the *P button to move to the beginning of the current track,

The search function may not be able to detect tracks under the follo~ing conditions:

*Blenks of less than 4 seconds between tracks

*NoIsy blanks

*Long passages of low-end sound

s Low overall recording levels

About cassette tapes

o To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool.

&	Tab for side A
Type 11tape
detection
slot

To record on the tape again, cover the tab openings with adhesive tape, etc. (On Type 11tapes, take care not to cover the Type II tape detection slot.)

o 120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recommended.

e Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the mechanism.

DOLBY NR system

The Dolby Noise Reduction system reduces tape hiss noise. For optimum performance when playing back a tape recorded with the DOLBY NR system, turn on the DOLBY NR system.

ENGLISH I 2